High Power Solar Lighting

July 30, 2017
Solar Lights

The Hubbell exterior LED Roadway 12V DC satisfies RP-8 2007 guidelines for regional applications while utilizing Light-emitting Diode benefits of much better uniformity and eliminating hot places. This off the grid illumination option provides low-to-zero maintenance and power cost savings with longevity LEDs.

Fixture:	Hubbell Exterior LED Roadway 12V DC
Mounting Height:	18 ft
Lumens:	2710
IES file:	RMCT-30L-D-5K.IES

ROADWAY RP-8 - Roadway Illuminance Guidelines

Illumination instructions and standards for roadway lighting have actually a few factors and characteristics to think about. The following is a table outlining footcandle readings posted by the IESNA for roadway applications.

(RP-8) suggested Minimum Maintained typical lux (fc)

Application		Pavement Category lux (fc)			Uniform Illuminance	Veiling luminance Ration
Roadway Type	Pedestrian Conflict Region	R1	R2/R3	R4	E avg/ E min	Lv max/L avg
Regional	High	6 (0.6)	9 (0.9)	8 (0.8)	6.0	0.4
	Medium	5 (0.5)	7 (0.7)
	Minimal	3 (0.3)	4 (0.4)

Source: www.hubbelloutdoor.com

RELATED FACTS

Researchers in Prof. Yi Cui's laboratory have used a novel electrospinning process to fabricate a unique, transparent, highly conductive metal nanofiber material that could be used to replace indium tin oxide (ITO) in transparent electrodes. The fibers have a...
Researchers in Prof. Yi Cui's laboratory have used a novel electrospinning process to fabricate a unique, transparent, highly conductive metal nanofiber material that could be used to replace indium tin oxide (ITO) in transparent electrodes. The fibers have a...
Peak of Eternal Light (PEL) describes a point on a body within the Solar System which is always in sunlight. Such a peak must have high altitude, and be on a body with very small axial tilt. The existence of such peaks was first postulated by Beer and Mädler in 1837...